 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Micrel, Inc. 9-BIT TTL-TO-ECL WITH TTL, ECL ENABLE SY10H600 SY100H600 SY10H600 SY100H600 FEATURES 9-bit ideal for byte-parity applications Flow-through configuration Extra TTL and ECL power/ground pins to minimize switching noise ECL and TTL enable inputs Dual supply 3.5ns max. D to Q PNP TTL inputs for low loading Choice of ECL compatibility: MECL 10KH (10Hxxx) or 100K (100Hxxx) Fully compatible with MC10H/100H600 Available in 28-pin PLCC package DESCRIPTION The SY10/100H600 are 9-bit, dual supply TTL-to-ECL translators. Devices in the Micrel 9-bit translator series utilize the 28-lead PLCC for optimal power pinning, signal flow-through and electrical performance. The H600 features both ECL and TTL logic enable controls for maximum flexibility. The 10H version is compatible with MECL 10KH ECL logic levels. The 100H version is compatible with 100K levels. BLOCK DIAGRAM ENECL ENTTL D0 D1 D2 D3 TTL D4 D5 D6 D7 D8 Q0 Q1 Q2 Q3 Q4 Q5 Q6 Q7 Q8 ECL PIN NAMES Pin GND VCCE VCCO VCCT VEE D0-D8 Q0-Q8 ENECL ENTTL Function TTL Ground (0V) ECL VCC (0V) ECL VCC (0V) -- Outputs TTL Supply (+5.0V) ECL Supply (-5.2/-4.5V) Data Inputs (TTL) Data Outputs (ECL) Enable Control (ECL) Enable Control (TTL) M9999-062706 hbwhelp@micrel.com or (408) 955-1690 Rev.: E Amendment: /1 1 Issue Date: June 2006 Micrel, Inc. SY10H600 SY100H600 PACKAGE/ORDERING INFORMATION VCCT D3 Ordering Information(1) 18 17 16 D5 D4 D2 D1 D0 25 24 23 22 21 20 19 D6 D7 D8 GND ENTTL NC ENECL 26 27 28 1 2 3 4 5 6 7 8 9 10 11 Q0 Q1 VCCE VCCO Q2 VCCO Q3 Part Number SY10H600JC SY10H600JCTR(2) SY100H600JC SY100H600JCTR(2) SY10H600JZ(3) SY10H600JZTR(2, 3) SY100H600JZ(3) SY100H600JZTR(2, 3) Notes: Package Type J28-1 J28-1 J28-1 J28-1 J28-1 J28-1 J28-1 J28-1 Operating Range Commercial Commercial Commercial Commercial Commercial Commercial Commercial Commercial Package Marking SY10H600JC SY10H600JC SY100H600JC SY100H600JC SY10H600JZ with Pb-Free bar-line indicator SY10H600JZ with Pb-Free bar-line indicator SY100H600JZ with Pb-Free bar-line indicator SY100H600JZ with Pb-Free bar-line indicator Lead Finish Sn-Pb Sn-Pb Sn-Pb Sn-Pb Matte-Sn Matte-Sn Matte-Sn Matte-Sn TOP VIEW PLCC 15 14 13 12 VCCO Q6 VEE Q8 Q7 28-Pin PLCC (J28-1) Q5 Q4 1. Contact factory for die availability. Dice are guaranteed at TA = 25C, DC Electricals only. 2. Tape and Reel. 3. Pb-Free package is recommended for new designs. M9999-062706 hbwhelp@micrel.com or (408) 955-1690 2 Micrel, Inc. SY10H600 SY100H600 TRUTH DIAGRAM LOGIC TABLE ENECL H H X X L ENTTL X X H H L D H L H L X Q H L H L L DC ELECTRICAL CHARACTERISTICS LOGIC DIAGRAM VCCT = 5.0V 10%; VEE = -4.75V to -5.5V (10H Version); VEE = -4.2V to -5.5V (100H Version) TA = 0C Symbol IEE Parameter Power Supply Current, ECL Power Supply Current, TTL 10H 100H Min. -- -- -- -- Max. 125 122 48 50 TA = +25C Min. -- -- -- -- Max. 125 123 48 50 TA = +85C Min. -- -- -- -- Max. 125 132 48 50 mA -- Unit mA Condition -- ICCH ICCL AC ELECTRICAL CHARACTERISTICS LOGIC DIAGRAM VCCT = 5.0V 10%; VEE = -4.75V to -5.5V (10H Version); VEE = -4.2V to -5.5V (100H Version) TA = 0C Symbol tPD Parameter Propagation Delay to Output D ENECL/ENTTL Output Rise/Fall Time 20% to 80%, 80% to 20% Min. 1.4 1.8 0.5 Max. 3.0 3.7 1.5 TA = +25C Min. 1.5 1.9 0.5 Max. 3.2 3.9 1.5 TA = +85C Min. 1.7 2.0 0.5 Max. 3.5 4.1 1.5 ns 50 to -2.0V Unit ns Condition 50 to -2.0V tr tf M9999-062706 hbwhelp@micrel.com or (408) 955-1690 3 Micrel, Inc. SY10H600 SY100H600 28-PIN PLCC (J28-1) Rev. 03 MICREL, INC. 2180 FORTUNE DRIVE SAN JOSE, CA 95131 USA TEL + 1 (408) 944-0800 FAX + 1 (408) 474-1000 WEB http://www.micrel.com The information furnished by Micrel in this data sheet is believed to be accurate and reliable. However, no responsibility is assumed by Micrel for its use. Micrel reserves the right to change circuitry and specifications at any time without notification to the customer. Micrel Products are not designed or authorized for use as components in life support appliances, devices or systems where malfunction of a product can reasonably be expected to result in personal injury. Life support devices or systems are devices or systems that (a) are intended for surgical implant into the body or (b) support or sustain life, and whose failure to perform can be reasonably expected to result in a significant injury to the user. A Purchaser's use or sale of Micrel Products for use in life support appliances, devices or systems is at Purchaser's own risk and Purchaser agrees to fully indemnify Micrel for any damages resulting from such use or sale. (c) 2006 Micrel, Incorporated. M9999-062706 hbwhelp@micrel.com or (408) 955-1690 4 |
Price & Availability of SY10H60006
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |